If you have any questions you may give us a call at (757) 223 -9382
A Better View Glass and Mirror
wants to thank you for visiting our site.
Please read the following for further instructions that may save you time and money...
If you Have a Tile Shower with a curb (This is the higher section which keeps water out) you want to make sure that the curb has a slight angle toward the shower. This is very important, I have seen them angled out. Not Good ,you will have leaks -depending on the shower enclosure you have installed -some will hold water and then eventually leak.
If the shower your measuring is straight,With no turns or angles. You will need a level and check the curb to make sure it is level and not out. If the shower curb is not level and you decide to have a Sliding Shower Door. The Enclosure will need an adapter on the bottom to make the top level so the Shower Doors will not move down to the low point,The Doors wont stay shut.
Lets start with measuring the bottom along the curb,write down your size. Now measure the center ,write down your size.
Now measure across the top,and write down the size.Take the level and check the Shower walls to make sure they are plumb.When you measured all three areas . They can be the same and not be plumb.
Please use the measure sheets below to assist you in measuring your shower:
Measure sheets can be printed out filled in and faxed to us at 757-223-9383; please be sure to include all of your contact information.
If No.1 is your design which can be a door, a door and panel, sliding doors for tub or shower than click here to be taken to our fast convenient quote on line page. Please include as much information as you can so that we can assist you as quickly as possible.
Below are different layouts for your shower door, these will help in showing what areas to measure.
These should be centerline measurements for your shower enclosures.
